Skip to main content
C-Water

Aquaculture

Water Quality Is the Growing Environment.

In aquaculture the treatment system does not protect equipment — it maintains a living environment. That changes both the tolerance and the urgency.

Talk to an EngineerTalk to an Engineer

01Typical Water Systems

What Is Usually on Site.

  • Intake treatment

    Screening and filtration of incoming water, protecting stock from what the source carries.

  • Solids removal

    Drum and disc filtration removing uneaten feed and waste solids continuously.

  • Recirculation support

    Mechanical filtration ahead of biological treatment in recirculating systems.

  • Water quality monitoring

    Dissolved oxygen, pH and temperature measured continuously because the margin is small.

02Industry Water Challenges

What Makes It Difficult.

  • No tolerance for interruption

    A filtration or oxygenation failure has consequences within hours.

  • Load rises with the stock

    Solids and nutrient load grow through the production cycle, so the system has to be sized for the end of it.

  • Limited chemical options

    Most conventional treatment chemistry is unavailable where stock is present, which puts the weight on mechanical treatment.

  • Source variability

    Open intakes bring seasonal changes in turbidity, temperature and biological content.

03Operational Risks

What Is at Stake.

Stock loss

The asset at risk is biological, and losses are not recoverable.

Growth rate impact

Suboptimal water quality reduces performance long before it causes visible harm.

Discharge quality

Effluent from production is subject to environmental limits.

Related Solutions

View all

Industrial Water

Integrated treatment strategies for sites running several water systems at once.

Wastewater

Treatment strategies that support water quality, compliance and operational reliability.

Process Water

Engineer water quality around the needs of the process, not around a standard specification.

Specialised Water Treatment

Non-standard waters, difficult duties and systems where a catalogue solution has already been tried.

Technology Stack

View all
01TIMEX

Filtration

Removing what should not be there, at the degree the downstream equipment actually requires.

02Walchem

Sensors & Measurement

The parameters that reveal what a water system is doing, and what it takes to measure them reliably.

03Walchem

Monitoring & Control

Measure what matters, control what drifts, and keep a record of what actually happened.

04

Water Analysis

Knowing what is actually in the water, before deciding what to do about it.

Related Products

View all
TIMEXScreens & Strainers

TIMEX Drum Filters

Continuous mechanical solids removal at low pressure.

View Product
TIMEXDisc Filters

TIMEX Disc Filters

Depth-style disc filtration for organic and fibrous load.

View Product
TIMEXSelf-Cleaning Filters

TIMEX KMF Series

Automatic screen filtration for continuous duty on heavy solids load.

View Product
WalchemControllers

Walchem Intuition-6

Analytical controller for single-system cooling and general water-treatment duty.

View Product
TIMEXTreatment Systems

TIMEX Water Treatment Systems

Engineered treatment packages built around a defined duty.

View Product

Related Services

View all
01

Assess

System Assessment

A structured survey of condition, control quality, risk and improvement opportunity.

02

Engineer

Engineering & Design

Treatment schemes sized from measured data and specified so they can be built, run and maintained.

03

Maintain

Preventive Maintenance

Scheduled attention to the components whose quiet failure undermines everything else.

04

Monitor

Monitoring & Reporting

Continuous measurement turned into periodic reporting that says what changed and what to do.

Related Knowledge

View all
filtration6 min read

How Filtration Protects Downstream Equipment

Solids cost you three times over: they foul heat transfer, they shelter microbiology, and they consume treatment chemical that should have been protecting metal.

filtration6 min read

When Should You Use a Self-Cleaning Filter?

The decision turns on solids load, how much interruption the process tolerates, and what manual cleaning actually costs in labour and downtime.

Discuss Your Facility.

Every site is different, even within a sector. Tell us what you operate and what it is doing.

Talk to an EngineerRequest a Quote